Catalogue of Industries for which Foreign Investment is Encouraged

I. Agriculture, Forestry, Animal Husbandry and Fishery

1. Planting, development and production of woody plants that contain edible oils or are used as seasonings or industrial raw materials.

2. Development of planting technologies for green food vegetables or organic vegetables (including edible fungi and melons), dried and fresh fruit, and tea, and relevant production.

3. Development of new planting technologies for crops, such as sugar crops, fruit trees and pasture, and relevant production.

4. Production of flowers and construction and operation of nurseries.

5. Planting of rubber trees, oil palm, sisal and coffee.

6. Planting or breeding of Chinese medicinal materials.

7. Returning crop straw to farmland and the comprehensive utilization of crop straw; development and production of organic fertilizer resources.

8. Breeding of aquatic fingerlings, excluding China's rare and endemic species.

9. Construction and operation of environment protection projects, such as the planting of trees and grass to combat desertification and soil erosion.

10. Aqua farming, open sea-cage aquaculture, industrial aquaculture, and ecological mariculture.


II. Mining Industry

11. Exploration and exploitation of oil and natural gas, and utilization of mine gas.

12. Development and application of enhanced oil recovery (in the form of project services) and relevant new technologies.

13. Development and application of new technologies for oil exploration and exploitation in areas such as geophysical prospecting, drilling, well logging, mud logging, and down-hole operation.

14. Development and application of new technologies for enhancing utilization rate of mine tailings and the comprehensive application of ecological restoration technology in mining areas.

15. Exploration, exploitation and ore dressing of scarce minerals in China, such as sylvite and chromite.


III. Manufacturing Industries

(I)Agricultural and sideline food processing

16. Development and production of safe, high-performance and environment-friendly forage and additives of forage.

17. Aquatic product processing, shellfish purification and processing, and development of algal health food.

18. Processing of vegetables, dried and fresh fruit, and livestock and poultry products.


(II) Food manufacturing

19. Development and production of formula food for infants and young children, and for special medical purposes, and health food.

20. Development and production of forest foods.

21. Development of new technologies and production of natural food additives and natural flavors.


(III) Wine, beverage and purified tea manufacturing

22. Development and production of fruit and vegetable drinks, protein drinks, tea drinks, coffee drinks, and botanical drinks.


(IV)Textile industry

23. Production of multifunctional industrial textiles that are lightweight, high/low-temperature resistant and chemical-resistant, with high-performance and good light fastness, using non-woven, weaving, knitting or their composite techniques.

24. Printing, dyeing, finishing and processing of high-end textiles, using advanced energy conservation and emission reduction technologies and equipment.

25. Processing of special natural fibers (including but not limited to cashmere and other special animal fibers, bamboo fibers, bast and leaf fibers, silk, and colored cotton) that satisfy the ecological, comprehensive resource utilization and environmental protection requirements.


(V)Textile, clothing and costume

26. Clothing production, using the computer integrated manufacturing system.

27. Production of functional or special-purpose clothing.


(VI)Leathers, furs, feathers and related products and shoemaking industry

28. Cleaning and processing of hides and furs.

29. Finishing of leather with new techniques.

30. Multipurpose use of leather wastes.


(VII)Wood processing and wood, bamboo, rattan, palm fiber and straw products

31. Development of new technologies for the comprehensive utilization of three forest residues (logging residue, bucking residual and processing residual), “inferior quality lumbers, small-sized lumbers and firewood,” and bamboo, and the development and production of relevant new products.


(VIII)Culture and education, arts and crafts, and manufacturing of sports and recreational Equipment

32. Production of high-end carpets, embroidery and drawnwork products.


(IX)Petroleum processing, coking and nuclear fuel processing

33. Processing of phenol oil, processing of absorber oil and high-end utilization of coal pitch, excluding modified pitch.


(X)Manufacturing of chemical raw materials and chemical products

34. Development and production of new downstream products of polyvinyl chloride (PVC) and organosilicon.

35. Auxiliary raw materials for the production of synthetic materials: production of hydrogen peroxide-based propylene oxide, naphthalene dicarboxylate (NDC), 1,4-Cyclohexanedimethanol (CHDM), and butadiene-based adiponitrile and hexamethylenediamine with an annual production capacity of 50,000 tons or more.

36. Raw materials for the production of synthetic fibers: nylon 66 salt, and 1,3-propylene glycol.

37. Synthetic rubber: production of polyurethane rubber, acrylate rubber, epichlorohydrin rubber, fluorine rubber, silicon rubber, and other special rubbers.

38. Engineering plastics and plastic alloys: production of non-phosgene polycarbonate (PC), polyoxymethylene (POM), polyphenyl thioether, poly(ether-ether-ketone) (PEEK), polyimide, polysulfone, polyether sulfone, polyarylate (PAR), polyphenylene oxide (PPO) and its modified materials, liquid crystal polymer (LCP), and other products with an annual production capacity of 60,000 tons or more.

39. Fine chemicals: new catalyst products and technologies, processing technologies for the commercialization of dyes (pigments), electronic chemicals and papermaking chemicals, leather chemicals (excluding N,N-Dimethylformamide), oilfield chemicals, surfactants, water treatment chemicals, adhesives, production of inorganic fibers and nanomaterials, and deep processing of pigment encapsulation.

40. Production of low-volatility printing inks, such as water-based ink, E-beam solidified ink and UV-light solidified ink, and environment-friendly organic solvent.

41. Production of natural spices, synthetic spices and single ion spices.

42. Production of high-performance coatings, high solid, solventless coatings, water-based industrial coatings, and auxiliary water-based resins

43. Production of high-performance fluororesin and fluorine coating materials, medical intermediates containing fluorine, environment-friendly refrigerant, detergents and blowing agents.

44. Recovery of fluoride resources from the phosphorus chemical industry and aluminum smelters.

45. Development of new technologies for forestry chemical products and development and production of relevant new products.

46. Development and production of inorganic, organic and biological membranes for environmental protection purposes.

47. Development and production of new types of fertilizers: high potassium fertilizers, compound microbial inoculants, compound microbial fertilizers, decomposition agents for straws and refuse, and other microbial formulations with special functions.

48. Development and production of new varieties, new formulations, special-purpose intermediates, or auxiliary agents of highly efficient, safe and environment-friendly agricultural chemicals and development and application of relevant clean production process (process of ethylene-based acetochlor, aqueous phase chlorpyrifos, process of recovery of methyl chloride with glyphosate, production of chiral and stereospecific pesticides by oriented synthesis, and synthetic technique of diethyl thiophosphoryl chloride).

49. Development and production of biological agricultural chemicals and biological control products: microbial pesticides, microbial fungicides, agricultural antibiotics, insect pheromones, natural enemies, and microbial herbicides.

50. Comprehensive utilization, treatment and disposal of waste gas, liquid waste, and waste residue.

51. Production of organic polymer materials: aircraft skin coating, rare earth cerium sulphide red dyes, lead-free electronic packaging materials, lithographic slurry specifically for color plasma screens, microfibers with a small diameter and a large specific surface area, high-precision fuel filter paper, lithium-ion battery diaphragms, surface treatment self-restoration materials, and superhydrophobicnanocoating materials.


(XI)Pharmaceutical industry

52. Production of new compound drugs or drugs with active ingredients (including drug substance and formulations).

53. Amino acids: production of tryptophan, histidine, methionine, etc. using the zymotechnics process.

54. Production of new types of anticarcinogenic drugs, cardiovascular and cerebrovascular drugs, and nervous system drugs.

55. Production of new types of drugs employing bioengineering and biotechnology.

56. Production of HIV/AIDS vaccines, Hepatitis C vaccines, contraceptive vaccines, and new types of vaccines for cervical carcinoma, malaria, “hand, foot and mouth” disease, etc.

57. Development and production of marine drugs.

58. Pharmaceutical formulations: production of new formulations and new products employing new technologies, such as slow release, controlled release, targeting, and percutaneous absorption.

59. Development and production of new excipients.

60. Production of special antibacterial drug substance for animals, including antibiotics and chemical synthesis API.

61. Production of new products and new formulations of antibacterial drugs, anthelmintics, insecticides and anti-coccidiosis drugs for veterinary use.

62. Development and production of new types of diagnostic reagents.


(XII)Chemical fiber manufacturing

63. Production of high-tech chemical fibers (excluding viscose fibers), including but not limited to differential chemical fibers, aramid fibers, carbon fibers, high-performance/high modulus polyethylene fibers, and polyphenylene sulfide (PPS) fibers.

64. Production of new types of polyester for fiber or non-fiber use: polytrimethylene terephthalate (PPT), polyethylene naphthalate (PEN), polycyclohexylene dimethylene terephthalate (PCT), and glycol-modified polyethylene terephthalate (PETG).

65. Production of biomass fibers by utilizing new types of renewable resources and environment-friendly process, including but not limited to new solvent spun cellulose fibers (Lyocell), regenerated cellulose fibers using bamboo, hemp, etc., poly lactic acid (PLA) fibers, chitin fiber, polyhydroxyalkanoates (PHA) fibers, and animal and plant protein fibers.

66. Development and production of new polyamides such as nylon 11, nylon 1414, nylon 46, long carbon chain nylon, and high temperature resistance nylon.

67. Production of aramid fibers and cords for radial tires.


(XIII) Rubber and Plastic Products

68. Development and production of new photoecological, multifunctional and wide-width agricultural films.

69. Recycling and reutilization of plastic waste.

70. Development of new soft plastic packaging technologies and development and production of new varieties of soft plastic packaging products, including high-barrier and multifunctional films and relevant raw materials.


(XIV) Nonmetallic Mineral Products

71. Development and production of building materials featuring energy conservation, environmental protection, waste recycling, light-weight, high-strength, high performance, and multiple functions.

72. Production of energy-saving and high-efficiency chemical building materials using plastic to replace steel or wood.

73. Production of SBS/APP modified bitumen waterproof rolls with an annual output of 10 million square meters or more; wide (two meters or more) ethylene propylene diene monomer (EPDM) rubber waterproof rolls and relevant auxiliary materials; wide (two meters or more) polyvinyl chloride (PVC) waterproof rolls; and thermoplastic polyolefin (TPO) waterproof rolls.

74. Development and production of functional glass using new technologies: electromagnetic wave shielding glass; glass substrate for microelectronic use; infrared transmitting lead-free glass; electronic-grade large-scale quartz glass products (such as pipe, plate, crucible, instruments, and utensils); multiple-functional windshield glass with excellent optical performance; extreme materials and products for use in information technologies (including quartz glass bushing and ceramic wafer for waveguide-grade, high-precise optical fiber preform rod); purification processing of raw materials for high pure (≥99.998%) or ultrapure (≥99.999%) crystal.

75. Production of conductive glass for thin film batteries, glass for solar illuminator, and conductive glass for buildings.

76. Production of glass fiber products and special glass fibers: low dielectric glass fibers, quartz glass fibers, high silica glass fibers, high strength and high elastic glass fibers, ceramic fiber, etc. and their products.

77. Production of optical fibers and their products: optical fiber bundles for image transmission and laser optical fibers for medical treatment; super second-generation and third-generation microchannel plates; optical fiber panels; image inverters; and glass fiber cones.

78. Standardized refinement of ceramics raw materials and production of high-grade decorative materials used in ceramics.

79. Production of environment-friendly (non-chromizing) refractory materials used in furnaces, including but not limited to cement, electronic glass, ceramics, and microporous carbon bricks.

80. Production of porous ceramics.

81. Production of new inorganic and nonmetallic materials and products: composite materials, special ceramics, special sealing materials (including high-speed oil-seal materials), special friction materials (including high-speed friction brake products), special binding materials, special latex materials, underwater acoustic rubber products, and nanophase materials.

82. Production of organic-inorganic composite cellular insulation materials.

83. Production of high-tech composite materials: continuous fiber reinforced thermoplastic composite materials and prepregs, auxiliary materials for molding of resin-based composite materials with thermal resistance of 300°C or above, resin-based composite material (including sports goods and light-weight high-strength parts of vehicle), special-function composite materials and their products (including composite material products used in deep water or for diving and composite materials products for medical treatment and recuperation), carbon or carbon composite materials, high-performance ceramic-based composite materials and their products, metal or glass-based composite materials and their products, metal-layered composite materials and their products, ultra-high pressure composite rubber hoses (pressure ≥ 320MPa), and large passenger aircraft tires.

84. Production of raw materials for precision and high-performance ceramics: ultra-fine silicon carbide (SiC) powder (purity > 99%, average particle size < 1μm), ultra-fine silicon nitride powder (Si3N4) (purity > 99%, average particle size < 1μm), high-purity ultra-fine alumina powder (purity > 99%, average particle size < 0.5μm), low-temperature sintered zirconia (ZrO2) powder (sintering temperature < 1350 °C), high-purity aluminum nitride (AlN) powder (purity > 99%, average particle size < 1μm), rutile titanium dioxide (TiO2) powder (purity > 98.5%), white carbon black (particle size < 100nm), and barium titanate (purity > 99%, average particle size < 1μm).

85. Development and production of high-quality artificial crystals and thin-film transistor products: artificially synthesized crystal (piezoelectric crystal and ultraviolet ray transmitting crystal); super-hard crystal (cubic boron nitride crystal); high-temperature resistant and highly-insulated artificially synthesized crystal (artificially synthesized mica); new electro-optic crystal; high-power laser crystal and large-scale scintillation crystal; diamond-film tool; ultrathin synthetic diamond saw blade with a thickness of not more than 0.3mm.

86. Fine processing of nonmetallic minerals, ultra-fine grinding, high purifying, refining, and modified performance.

87. Production of ultra-high-power graphite electrodes.

88. Production of pearl mica (particle size of 3-150μm).

89. Production of multi-dimensional and multi-directional integral fabrics and shape fabrics.

90. Safe disposal of solid wastes using new dry process cement kilns.

91. Recycling of building waste.

92. Comprehensive utilization of industrial wastes, such as by-product gypsum.

93. Development and application of new technologies for the comprehensive utilization of nonmetal mine tailings; ecological restoration of mines.


(XV) Nonferrous metal smelting and rolling industries

94. Production of silicon single crystals and polished wafers with a diameter of 200mm or more.

95. Production of high-tech nonferrous materials: compound semiconductor materials (gallium arsenide, gallium phosphide, indium phosphide, and gallium nitride); high-temperature superconducting materials; memory alloy materials (titanium nickel and copper- and iron-based memory alloy materials); ultra-fine (nano) calcium carbide and ultra-fine (nano) crystal hard alloy; ultra-hard composite materials; precious metal composite materials; combination of light metal composite materials and heterogeneous materials; and aluminum foils for radiators; medium- and high-voltage cathode capacitor aluminum foils; special large aluminum alloy sections; aluminum alloy precision forging dies; overhead conductors for electrified railway lines; ultra-thin copper strips; copper alloy materials for corrosion-resistant heat exchangers; high-performance copper-nickel and copper-iron alloy strips; materials for processing beryllium copper strips, lines, pipes and rods; high-temperature resistant and anti-senescence tungsten filaments; magnesium alloy castings; lead-free solder; magnesium alloys and their products; foamed aluminum; titanium alloy smelting and processing; sponge zirconium at atomic energy level; and deeply processed tungsten and molybdenum products.


(XVI) Metal products

96. Research, development and manufacturing of new types of light-weight and environment-friendly materials for aviation, aerospace, automobiles and motorcycles, including but not limited to special-purpose aluminum sheets, aluminum-magnesium alloy materials, and aluminum alloy motorcycle frames.

97. Research, development and manufacturing of semi-solid light metal rapid formation materials.

98. Manufacturing and processing (including painting and processing inner and outer surface of products) of metal packing products (thickness< 0.3mm) used for packing various kinds of grain, oil, food, vegetables, fruits, beverages, and household chemicals.

99. Manufacturing of nickel-saving stainless steel products.


(XVII) General equipment manufacturing

100. Manufacturing of high-end computerized numerical controlled (CNC) machine tools and key spare parts: five-axis alignment CNC machine tools, CNC coordinate boring and milling processing center, CNC coordinate grinding machines.

101. Manufacturing of multi-station forging forming machines of 1,000 tons or above.

102. Manufacturing of equipment for dismantling, crushing, and post-processing and sorting of retired automobiles.

103. Manufacturing of flexible transfer lines (FTL).

104. Manufacturing of vertical multi-joint industrial robots and welding robots and relevant welding devices and equipment.

105. Manufacturing of sub-micron and ultra-fine grinders.

106. Manufacturing of wheeled or crawler cranes of 400 tons or above.

107. Design and manufacturing of high-pressure plunger pumps and engines with working pressure ≥ 35MPa and low-speed large-torque engines with working pressure ≥ 35MPa.

108. Manufacturing of integrated hydraulic-pressure multiple unit valve with working pressure ≥ 25MPa and electro-hydraulic proportional servo elements.

109. Design and manufacturing of valve terminal, pneumatic solenoid valve of less than 0.35W, and high-frequency electrically-controlled gas valves of 200Hz or more.

110. Design and manufacturing of hydrostatic drive devices.

111. Development and manufacturing of non-contact gas film seals with pressure >10MPa and dry gas seals with pressure > 10MPa, including experimental devices.

112. Development and manufacturing of equipment for automobile polymer materials, such as friction plates, remodeled phenolic pistons, nonmetallic hydraulic master/sub-pumps, etc.

113. Manufacturing of the third-generation and above car wheel hub bearings; bearings for high- or medium-grade CNC machine tools or processing centers; high-speed wire rod or plate rolling mill bearings; high-speed railway bearings; low-noise bearings with vibration below Z4; P4 or P2 level bearings of various bearings; bearings of wind turbine generator set; aircraft bearings.

114. Manufacturing of high-density, high-precision and complex-shaped powder metallurgical parts and chains used for automobile, engineering machinery, etc.

115. Manufacturing of gear transmission used for wind power or high speed rail, gear transmission agent with adjustable blades used for vessels, and large-sized and heavy-load gear boxes.

116. Manufacturing of high-temperature resistant insulation materials (F and H insulation classes) and molded insulation products.

117. Development and manufacturing of accumulator bladders and rubber and plastic seals for hydropneumatic use.

118. Manufacturing of high-precision, high-strength (level 12.9 or above), special-shaped and assembly fasteners.

119. Manufacturing of miniature precision transmission junction pieces (clutches).

120. Manufacturing of coupling shaft for heavy rolling mills.

121. Remanufacturing of machine tools, engineering machinery, railroad engine equipment, automobile parts and components, key components of medical imaging equipment, and office equipment such as copiers.

122. Development and manufacturing of digital cameras with 10 million pixels or more, or horizontal field of 120 degrees or more, and relevant optical lens, and optoelectronic modules.

123. Manufacturing of office machinery: all-in-one multifunctional office equipment (printer, copier, fax machine, and scanner), color printing devices, heads of high-resolution color printers with precision of 2400dpi or more, and OPC drums.

124. Manufacturing of film machinery: 2K, 4K digital cinema projectors, digital cinema cameras, and digital video production and editing equipment.


(XVIII) Special-purpose equipment manufacturing

125. Manufacturing of trackless equipment for excavation, loading and transport in mines, including but not limited to: mechanically-driven tippers for mining with a capacity of 200 tons or more; mobile crushers; bucket wheel excavators with a capacity of 5,000 cubic meters or more per hour; loaders for mining with a capacity of 8 cubic meters or more; and electrically-dragged coal mining machines of 2,500 kilowatts or more.

126. Manufacturing of equipment for geophysical exploration, excluding gravity and magnetic observations, and well logging: MEME seismometers; digital telemetric seismographs; digital imaging systems and digitally controlled well logging systems; devices and apparatus for horizontal wells, directional wells and drilling rigs; and measurement-while-drilling (MWD) tools.

127. Manufacturing of equipment for oil exploration, drilling, collection and transportation: floating drilling systems and floating production systems with an operating water depth of more than 1,500 meters and the supporting subsea oil extraction, collection and transportation equipment.

128. Manufacturing of large-caliber rotary drilling rigs with a caliber of 2 meters or more and depth of 30 meters or more, push benches with a diameter of 1.2 meters or more, complete sets of large equipment with a pull-back force of 300 tons or more for laying underground pipes and lines without digging, and underground diaphragm wall construction drilling rigs.

129. Design and manufacturing of large bulldozers of 520 horsepower or more.

130. Design and manufacturing of silt removers with a capacity of 100 cubic meters or more per hour and dredging devices for dredgers with a capacity of 1,000 tons or more.

131. Design and manufacturing of equipment for the construction of concrete cut-off walls used for flood prevention dikes.

132. Manufacturing of underwater earthwork construction machinery: bulldozers, loaders, excavators, etc. operating nine meters underwater or deeper.

133. Manufacturing of equipment for maintenance and automatic testing of highways and bridges.

134. Manufacturing of equipment for operational monitoring, ventilation, disaster prevention and rescue systems of highway tunnels.

135. Design and manufacturing of maintenance machinery and inspection and monitoring equipment for large-scale railway construction, railway tracks, bridges and tunnels and their key parts and components.

136. Manufacturing of equipment for (asphaltic) linoleum tiles and equipment for producing galvanized steel sheets and other metal roofs.

137. Manufacturing of equipment for environment-friendly and energy-saving on-site polyurethane spraying waterproof and thermal insulation systems; technology of preparing polyurethane sealants and manufacturing of relevant equipment; and technology of preparing improved silicone sealants and manufacturing of relevant production equipment.

138. Design and manufacturing of high-precision strip mills (thickness precision of 10 microns).

139. Manufacturing of ore dressing equipment for multi-element, fine-particle and refractory metal minerals.

140. Manufacturing of the key equipment of complete sets of ethylene equipment with an annual capacity of 1 million tons or more: mixing granulators with an annual processing capacity of 400,000 tons or more, helical-conveyer centrifuges with a diameter of 1,000 mm or more, and low-flow high-head centrifugal pump.

141. Design and manufacturing of metal product molds, including extrusion dies for pipes, rods and section bars made of copper, aluminum, titanium and zirconium.

142. Design and manufacturing of punching dies for automobile body covers, large-sized injection molds for automobile dashboard, bumper, etc., and clamps and gauges for automobiles and motorcycles.

143. Design and manufacturing of production equipment for power batteries for automobiles.

144. Design and manufacturing of precise die molds (punching dies with a precision higher than 0.02 millimeter and cavity molds with a precision higher than 0.05 millimeter)

145. Design and manufacturing of nonmetal product molds.

146. Manufacturing of beer bottling equipment with a capacity of 60,000 bottles or more per hour, hot- and medium-temperature beverage bottling equipment with a capacity of 50,000 bottles or more per hour, and aseptic filling equipment with a capacity of 36,000 bottles or more per hour.

147. Production technologies of amino acids, enzyme preparations, food additives, etc. and the manufacturing of key equipment.

148. Manufacturing of complete sets of equipment for animal feed processing with a capacity of 10 tons or more per hour and the key parts of such equipment.

149. Manufacturing of equipment for lightweight corrugated boards and cartons with corrugation height of 0.75 millimeter or less.

150. Manufacturing of sheet-fed and multi-color offset presses (width ≥ 750 millimeters; printing speed: single side and multiple color ≥ 16,000 sheets per hour, and both sides and multiple color ≥ 13,000 sheets per hour).

151. Manufacturing of single-width single-paper path web-fed lithographic printing presses with a printing speed of more than 75,000 bisect sheets per hour (787 × 880 millimeters), double-width single-paper path web-fed lithographic printing presses with a printing speed of more than 170,000 bisect sheets per hour (787 × 880 millimeters), and commercial web-fed lithographic printing presses with a printing speed of more than 50,000 bisect sheets per hour (787 × 880 millimeters).

152. Manufacturing of multi-color wide flexographic presses (printing width≥ 1,300 millimeters and printing speed ≥ 350 meters per second), inkjet digital printing presses (used for publication: printing speed ≥ 150 meters per minute and resolution ≥ 600dpi; used for packaging: printing speed ≥ 30 meters per minute and resolution ≥ 1,000dpi; used for variable data: printing speed ≥ 100 meters per minute and resolution ≥ 300dpi).

153. Manufacturing of systems for ink color computer pre-setting, remote ink color control, water-ink speed tracking, automatic printing quality inspection and tracking, and shaftless driving technology; manufacturing of high-speed automatic pasters and feeders with a speed of 75,000 sheets per hour, remotely adjustable high-speed folding machines, automatic overprinting systems, cooling devices, silicon-adding systems, and deviation adjustment devices.

154. Manufacturing of electron-gun automatic coating machines.

155. Deep processing technology for sheet glass and manufacturing of relevant equipment.

156. Manufacturing of complete sets of equipment such as new types of paper (including pulp) making machines.

157. Manufacturing of equipment using new leather post ornament and processing technology.

158. Development and manufacturing of new agricultural product processing and storage equipment: new equipment for the processing, storage, preservation, grading, packaging, and drying of grains, oil plants, vegetables, dried and fresh fruit products, meat products, aquatic products, and other products; agricultural product quality inspection instruments and equipment; damage-free quality inspection instruments and equipment for agricultural products; rheometers; farinographs; ultramicro crushing equipment; high-efficiency dewatering equipment; high-efficiency fruit juice condensation equipment achieving five or more effects; sterilization equipment for powder food materials; solid and semisolid food aseptically packaging equipment; and disk-type centrifugal separators.

159. Manufacturing of agricultural machinery: agricultural equipment (automatic irrigation equipment for greenhouses, equipment for automatic disposition of nutrient solutions and fertilization, high-efficiency vegetable seedling equipment, and soil nutrient analysis equipment); tractors with an engine power of 120 kilowatts or more and the auxiliary farm implements; diesel engines with low fuel consumption, low noise and low emission; sprayers auxiliary to large tractors and equipped with residual droplets retrieval devices; high-performance rice transplanters; cotton picking machines and cotton picking platforms; self-propelled (hydraulically or mechanically-driven) corn combine harvesters adaptable to various row spacings; peanut harvesters; rapeseed harvesters; cane harvesters; and beet harvesters.

160. Manufacturing of forestry machinery and instruments using new technology.

161. Manufacturing of equipment for the collection, bundling and comprehensive utilization of crop straws.

162. Manufacturing of equipment for the resource utilization of agricultural waste and waste from livestock and poultry breeding meeting a certain scale.

163. Manufacturing of agricultural equipment using fertilizer-saving, pesticide- saving or water-saving technology.

164. Manufacturing of equipment for cleaning electromechanical wells and equipment for producing cleaning agents.

165. Manufacturing of electronic endoscopes.

166. Manufacturing of fundus cameras.

167. Manufacturing of key components of medical imaging equipment, including but not limited to high-field-strength superconducting magnetic resonance imaging equipment, X-ray computed tomography imaging equipment, and digital color diagnostic ultrasound equipment.

168. Manufacturing of (3D) ultrasonic transducers for medical use.

169. Manufacturing of equipment for boron neutron capture therapy (BNCT).

170. Manufacturing of image-guided intensity modulated radiation therapy systems.

171. Manufacturing of haemodialysis machines and hemofiltration machines.

172. Manufacturing of equipment for full-automatic biochemistry monitoring, five-classified blood cytoanalyze, full-automatic chemiluminescence immunity analyzers, and high throughput gene sequencing system.

173. New technology for drug quality control and manufacturing of new equipment for drug quality control.

174. Development of new analysis technology and new extracting process for active substance in natural drugs; development and manufacturing of new extracting equipment.

175. Manufacturing of multi-layer co-extrusion water-cooled blown film equipment for non-PVC medical infusion bags.

176. Development and manufacturing of new textile machinery, key parts and components, and textile testing and experimental apparatus.

177. Manufacturing of computer-aided jacquard artificial fur machines.

178. Manufacturing of equipment specially for producing solar cells.

179. Manufacturing of air pollution prevention and control equipment: high-temperature resistant and corrosion-resistant filtering materials, low-NOx combustion devices, catalyst for flue gas denitrogenation and complete sets of denitrogenation equipment, industrial organic exhaust purification equipment, diesel vehicle exhaust purification equipment, and heavy metal exhaust air treatment equipment.

180. Manufacturing of water pollution prevention and control equipment: horizontal spiral centrifugal dehydrators, membrane and membrane materials, ozone generators with a capacity of more than 50kg/h, chlorine dioxide generators with a capacity of more than 10 kg/h, ultraviolet disinfection devices, small domestic sewage treatment equipment used in rural areas, and heavy metal wastewater treatment equipment.

181. Manufacturing of solid waste treatment and disposal equipment: sewage plant sludge disposal and resource recycling equipment, complete sets of refuse incineration equipment with a daily treatment capacity of 500 tons or more, landfill leachate treatment technology equipment, anti-seepage geo-membranes in landfills, building waste treatment and resource recovery utilization equipment, devices for disposal of hazardous waste, devices for power generation with biogas in landfills, treatment equipment for ferrous wastes, and soil remediation equipment.

182. Development and manufacturing of equipment for the comprehensive utilization of red mud from aluminum industry.

183. Manufacturing of equipment for the comprehensive utilization of mine tailings.

184. Manufacturing of equipment for the collection, treatment and recycling of used and waste plastics, electrical appliances, rubbers, and batteries.

185. Manufacturing of reclamation equipment for used and waste textiles.

186. Manufacturing of equipment for the remanufacturing of used and waste mechanical and electrical products.

187. Manufacturing of devices for the comprehensive utilization of used and waste tires.

188. Environmental protection technology for aquatic ecosystems and the manufacturing of relevant equipment.

189. Manufacturing of portable assembling water purification equipment.

190. Unconventional water treatment or recycling equipment and water quality monitoring instruments.

191. Leak test equipment and instruments for industrial water pipeline networks and equipment (appliances).

192. Development of technologies for seawater desalination and circulating cooling with a daily capacity of 100,000 cubic meters or more and manufacturing of relevant complete sets of equipment.

193. Manufacturing of special meteorological observation and analysis equipment.

194. Technology system development for seismic stations, networks and mobile seismologic observation and manufacturing of relevant apparatus and equipment.

195. Manufacturing of radial tire building machine with four or more drums.

196. Manufacturing of rolling resistance testers and establishment of tire noise laboratories.

197. Manufacturing of equipment using new technology for heat supply metering and temperature control devices.

198. Manufacturing of equipment for hydrogen energy preparation, storage and transportation and inspection systems.

199. Manufacturing of new heavy residual oil gasification and atomizing nozzles, high-efficiency steam trap valves with a leakage rate of 0.5% or below, and high-temperature ceramic heat exchanger with temperature of 1,000 °C or above.

200. Manufacturing of devices for recovery of marine oil spilling.

201. Manufacturing of equipment for utilization of low concentration coalmine gas and ventilation air methane.

202. Development and utilization of clean coal technologies and products as well as manufacturing of relevant equipment (coal gasification and liquefaction, coal water slurry and industry shape-coal.

203. Development of technologies for fire prevention and control and rescue to be used in large-scale public buildings, high-rise buildings, petrochemical facilities, forest, mountains or water areas and underground facilities.

204. Manufacturing of intelligent medical rescuing equipment.

205. Manufacturing of hydrological monitoring sensors.


(XIX) Automobile Manufacturing

206. Manufacturing of automobile engines and establishment of engine research and development institutions: gasoline engines with power of not less than 70 kilowatts per liter, diesel engines with power of not less than 50 kilowatts per liter and displacement of less than 3 liters, diesel engines with power of not less than 40 kilowatts per liter and displacement of more than 3 liters, and engines using new energy resources such as fuel cells and mixed fuels.

207.205. Manufacturing of key automobile parts and components and research and development of key technologies: dual-clutch transmission (DCT), continuously variable transmission (CVT), automated mechanical transmission (AMT), gasoline engine turbocharger, viscous coupling (for four-wheel drive), actuator for automatic transmission (electromagnetic valve), hydraulic retarder, eddy current retarder, gas generators for automobile safety air-bags, common rail fuel injection technology (with maximum injection pressure of more than 2,000 pa), variable geometry turbocharging (VGT) technology, variable nozzle turbocharging (VNT) technology, engine emission control devices meeting China's Phase V pollutant emission standards, intelligent torque management (ITM) systems and coupler assembly, steer-by-wire systems, diesel particulate trap devices, special-purpose axles for low-floor large buses, energy-absorbing steering system, variable frequency air-conditioning system for large and medium buses, special rubber automobile accessories, and key parts and components of the above parts and components.

208. 206. Manufacturing and research and development of automobile electronic devices: electronic control systems and key parts and components of engine and chassis; vehicle electronic technologies (automobile information system and navigation system); automobile electronic bus network technologies (limited to Sino-foreign equity); input (sensor and sampling system) and output (actuator) components of electronic control system; electronic controllers for electric power steering system (limited to Sino-foreign equity); embedded electronic integrated systems; electronically-controlled air springs; electronically-controlled suspension systems; electronic valve system devices; electronic combination instrument; ABS/TCS/ESP systems; Brake-By-Wire (BBW) system; gearbox transmission control unit (TCU); tire-pressure monitoring system (TPMS); on-board diagnostics (OBD); engine anti-theft system; automatic bump-shielded system; and testing systems for automobile and motorcycle testing and maintenance.

209. Manufacturing of key parts and components of new energy automobiles: battery separators (thickness of 15-40μm, porosity of 40%-60%); battery management systems, motor management systems, and electronic control integration of electric vehicles; driving motors of electric vehicles (peak power density ≥ 2.5kW/kg, high-efficiency area: 65%, efficiency in working area ≥ 80%), vehicle DC/DC (input voltage of 100V-400V), high-power electronic devices (IGBT, voltage class ≥ 600V, current ≥ 300A); and plug-in hybrid electromechanical coupling drive systems; low-platinum catalytic agent, composite membrane, membrane electrode, control valve of humidifier, air compressor, hydrogen recycle pump, 70MPa hydrogen cylinder.


(XX) Manufacturing of railways, ships, aircrafts and other transportation equipment

210. Manufacturing of engine emission control devices for motorcycles with large engine capacity (engine capacity 250ml) that meet China's Phase III pollution discharge standards for motorcycles.

211. Design, manufacturing and maintenance of civil aircrafts: aircrafts for trunk lines and regional aircrafts; and utility aircrafts.

212. Manufacturing and maintenance of civil aircraft parts and components.

213. Design and manufacturing of civil helicopters.

214. Manufacturing of parts and components of civil helicopters.

215. Manufacturing of ground-effect and water-effect aircrafts and design and manufacturing of unmanned aircrafts and aerostats.

216. Design, manufacturing and maintenance of aircraft engines, engine parts and components and aircraft auxiliary power systems.

217. Design and manufacturing of airborne equipment for civil aviation.

218. Manufacturing of aviation ground equipment: civil airport facilities, civil airport operation guarantee facilities, ground facilities for flight tests, flight simulation and training equipment, aviation test and measurement equipment, equipment for aviation ground tests, integrated test equipment for airborne equipment, special equipment for aeronautical manufacturing, special equipment for trial manufacturing of aeronautical materials, civil aircraft ground reception and application equipment, carrier rocket ground testing equipment, and equipment for carrier rocket mechanics and environmental experiments.

219. Design and manufacturing of civil satellite, and manufacturing of payload of civil satellite.

220. Manufacturing of parts and components of civil satellite.

221. Manufacturing of testing equipment for products aboard satellite.

222. Design of cruise ship and deep-water (3,000 meters or more) marine engineering equipment.

223. Design of low- and medium-speed diesel engines of vessels and their parts and components.

224. Design of cabin machinery of vessels.

225. Design of vessel communication and navigation equipment.

226. Design of yachts.


(XXI) Electric Machinery and Equipment Manufacturing

227. Manufacturing of key auxiliary equipment used for one million-kilowatt ultra-super critical thermal power units: safety valves and control valves.

228. Manufacturing of denitration equipment of sintering machines in steel industry.

229. Design and manufacturing of seals of thermal power equipment.

230. Manufacturing of large castings and forgings for coal-fired power station and hydropower station equipment.

231. Manufacturing of key auxiliary equipment for hydropower generating units.

232. Manufacturing of power transmission and transformation equipment.

233. Manufacturing of complete sets of equipment or key equipment for new energy power generation: equipment for photovoltaic power generation, geothermal power generation, tidal power generation, wave power generation, garbage power generation, biogas power generation, and wind power generation with a capacity of 2.5 megawatts or more

234. Manufacturing of Stirling generator sets.

235. Development and manufacturing of linear motors, plane motors, and their drive systems.

236. Manufacturing of high-tech green batteries: nickel-metal hydride (Ni- MH) batteries, nickel-zinc batteries, silver-zinc batteries, lithium-ion batteries, solar batteries, fuel batteries, etc., excluding energy type of new energy vehicle batteries.

237. Manufacturing of refrigeration compressors for air conditioning with motor adopting DC speed control technology, refrigeration compressors for air conditioning adopting CO2 natural refrigerants, and refrigeration equipment for air conditioning applying renewable energy (air source, water source or ground source).

238. Manufacturing of solar air conditioning and heating systems and solar drying devices.

239. Manufacturing of biomass drying pyrolysis systems and biomass gasification devices.

240. Manufacturing of alternating current (AC) variable voltage variable frequency (VVVF) drive devices.


(XXII) Manufacturing of computers, communication and other electronic equipment

241. Manufacturing of HD digital cameras and digital sound playing equipment.

242. Manufacturing of TFT-LCD, PDP, OLED and other panel displays and materials of displays, excluding TFT-LCD glass substrate for the 6th generation and below.

243. Manufacturing of key parts for large-screen color projection displays, including but not limited to optical engines, light sources, projection screens, high-resolution projection tubes, and micro-display projection modules.

244. Manufacturing of digital audio and video coding and decoding equipment; equipment for digital broadcasting and television studios; equipment for digital cable television systems; digital audio broadcasting transmission equipment; digital television up-and-down converters; digital television ground broadcasting single frequency network (SFN) equipment; and equipment for satellite digital TV uplink stations.

245. Design of integrated circuits; manufacturing of large-scale digital integrated circuits with a line width of 28 nanometers or less; manufacturing of analog or digital-analog integrated circuits with a line width of 0.11 micron or less, MEMS and compound semiconductor integrated circuits; and BGA, PGA, CSP, MCM, and other advanced encapsulation and testing.

246. Manufacturing of large- and medium-sized electronic computers, high performance computers with a computing capacity of 10,000 trillion calculations per second, portable minicomputers, large analog simulation systems, and large industrial controlling machines and controllers.

247. Manufacturing of computer digital signal processing system and boards.

248. Manufacturing of graphic and image recognition and processing system.

249. Development and manufacturing of high-capacity optical and disk drives and their components.

250. Manufacturing of high-speed memory system and intelligent memory device with a capacity of 100TB or more.

251. Manufacturing of computer-aided design (three-dimensional CAD) systems, electronic design automation (EDA), computer-aided testing (CAT) systems, computer-aided manufacturing (CAM) systems, computer-aided engineering (CAE) systems, and other computer application systems.

252. Development and production of software products.

253. Development and manufacturing of materials exclusively for electronic purposes, excluding development and manufacturing of optical fiber performs.

254. Manufacturing of equipment, testing instruments, tools, and molds exclusively for electronic purposes.

255. Manufacturing of new electronic parts and components: chip components, sensitive components and sensors, frequency control and selection components, hybrid integrated circuits, power electronic devices, optoelectronic devices, new electromechanical components, polymer solid capacitors, super-capacitors, passive integrated components, high-density interconnect (HDI) boards, flex printed circuit (FPC) boards, rigid-flex printed circuit (R-FPC) boards, and packaging boards.

256. Manufacturing of touch control system (touch control screens, touch components, etc.)

257. Development and manufacturing of VR and AR equipment.

258. Manufacturing of high-brightness light-emitting diodes (LEDs) with luminous efficiency of more than 140lm/W, LED epitaxial wafers (blue light) with luminous efficiency of more than 140lm /W, and white luminous tubes with luminous efficiency of more than 140lm /W and power of more than 200mW.

259. Development and production of key parts of high-density digital disk drives.

260. Production of recordable disks.

261. Development and manufacturing of key parts and components of 3D printing equipment.

262. Manufacturing of equipment for satellite communication systems.

263. Manufacturing of optical communication measuring instruments and optical transceivers with a speed of 40 Gb/s or more.

264. Manufacturing of ultra-wideband (UWB) communication equipment.

265. Manufacturing of equipment for wireless local area networks (including WAPI support) and wide area networks.

266. Manufacturing of time division multiplex equipment (TDM) with rate of 100Gbps or more, dense wavelength division multiplexing equipment (DWDM), broadband passive network equipment (including EPON, GPON, WDM-PON, etc.), next-generation DSL silicon and equipment, optical cross connect (OXC) equipment, automatically switched optical network (ASON) equipment, and transmission equipment for optical fiber communication at more than 40G/sSDH.

267. Development and manufacturing of IPv6-based next generation Internet system equipment, terminal equipment, testing equipment, software, and chips.

268. Development and manufacturing of the fourth generation and subsequent mobile communication cell phones, base stations, core network equipment, and network testing equipment.

269. Development and manufacturing of high-end routers with processing capacity of more than 6.4 Tbps and network switches of 40Tbps or more.

270. Manufacturing of equipment for air traffic control systems.

271. Development and manufacturing of electronic teaching aiding equipment for traditional Chinese medicines based on sound, light, electricity or touch-controlled computer information technologies and human body model with virtual pathology and physiology.


(XXIII) Manufacturing of instruments and meters

272. Manufacturing of industrial process automatic control system and devices: fieldbus control systems, large-scale programmable logic controller (PLC), two-phase flow meters, solid flow meters, and new-type sensors and field measuring meters.

273. Development and manufacturing of large precision instruments, and high-resolution microscope (resolution less than 200nm).

274. Manufacturing of high-precision digital voltmeters and ammeters (with a span of seven and a half bits or more).

275. Manufacturing of reactive power auto-compensation devices.

276. Manufacturing of new instruments and equipment for production safety.

277. Manufacturing of VXI bus automatic testing systems (meeting IEEE1155 international standards).

278. Development and manufacturing of coal mine underground monitoring and hazard forecasting systems and coal safety testing and management systems.

279. Manufacturing of engineering surveying and geophysical observation equipment.

280. Manufacturing of environmental monitoring instruments.

281. Manufacturing of instruments and equipment for hydrological data collection, processing, and transmission and for flood control early warning.

282. Manufacturing of instruments and equipment for marine exploration monitoring.


(XXIV) Comprehensive utilization of waste resources

283. Coal dressing and comprehensive utilization of coal ash, including desulfurized gypsum), coal gangue, etc.

284. Production of completely biodegradable materials.

285. Recycling and treatment of waste and used electrical and electronic products, automobiles, mechanical and electrical equipment, rubbers, metals, and batteries.


IV. Production and Supply of Electric Power, Heating Power and Fuel Gas

286. Construction and operation of ultra-supercritical unit power station with the capacity of a single unit of 600,000-kilowatt or more.

287. Construction and operation of back-pressure combined heat and power stations, combined cooling heating and power stations, and combined heat and power stations with capacity of 300,000 kilowatt or more.

288. Construction and operation of large air cooling unit power stations with the capacity of a single unit of 600,000-kilowatt or more in water-deficient areas.

289. Construction and operation of integrated gasification combined cycle power generation and other clean coal power generation projects.

290. Construction and operation of power generating projects with the capacity of a single unit of 300,000-kilowatt or more by using fluidized bed combustion bolters and coal gangue, middings and coal slime, etc.

291. Construction and operation of hydropower stations for the primary purpose of power generation.

292. Construction and operation of nuclear power stations.

293. Construction and operation of new energy power stations, including but not limited to solar energy, wind energy, geothermal energy, tidal energy, tidal current energy, wave energy, and biomass energy.

294. Construction and operation of power grid.

295. Seawater utilization (direct utilization of seawater or seawater desalination).

296. Construction and operation of water supply plants.

297. Construction and operation of renewable water plants.

298. Construction and operation of sewage treatment plants.

299. Construction and operation of vehicle charging stations and battery replacement stations.

300. Construction and operation of hydrogen filling stations.


V. Transportation, Warehousing and Postal Service Industries

301. Construction and operation of network of trunk railway lines.

302. Construction and operation of intercity railway, urban (suburban) railway, resource-oriented development railway, branch railway lines, and related bridges, tunnels, ferries and station facilities.

303. Comprehensive maintenance of infrastructures of high-speed railway lines, passenger railway lines and intercity railways.

304. Construction and operation of highways, independent bridges and tunnels.

305. Road freight companies.

306. Construction and operation of public dock facilities in ports.

307. Construction and operation of civil airports.

308. Air transportation companies.

309. General airline companies for agriculture, forestry, and fishery.

310. International marine transportation companies.

311. International container multimodal transportation services.

312. Construction and operation of oil (gas) pipelines and oil (gas) depots.

313. Construction and operation of coal pipeline transportation facilities.

314. Construction and operation of elevated three-dimensional automatic warehousing facilities and integrated warehousing facilities related to packaging, processing and distribution services.


VI. Wholesale and Retail Industries

315. Common distribution of general commodities, low-temperature distribution of live and fresh agricultural products and special drugs, as well as other logistical services and relevant technological services.

316. Rural chain distribution.

317. Construction and operation of pallet and container unit sharing system.


VII. Leasing and Commercial Service Industries

318. International economic, science and technology, environmental protection, and logistical information consulting services.

319. By contracting outsourced services, engaging in system application management and maintenance, information technology support management, bank back-office services, financial settlement, software development, off-shore call centers, data processing, and other outsourced information technology and business process services.

320. Venture capital enterprises.

321. Intellectual property right services.

322. Home service.


VIII. Scientific Research and Technical Services

323. Bioengineering and biomedical engineering technologies and biomass energy development technology.

324. Isotope, radiation and laser technology.

325. Marine development and marine energy exploitation technology, technology for comprehensive utilization of marine chemical resources, development and refinement or deep processing of relevant products, and marine medicine and biochemical product development technology.

326. Ocean monitoring technology (ocean tidal waves, weather, environmental monitoring) and seabed detection and oceanic resources exploration and assessment technologies.

327. Technologies for high value-added utilization of seawater chemical resources, including but not limited to production of salt and extraction and deep processing of potassium, bromine, magnesium and lithium by comprehensively utilizing desalinated dense seawater.

328. Offshore oil pollution cleaning and ecology recovery technology and relevant product development, technology for prevention and treatment of sea water eutrophication, technology for prevention and treatment of marine life explosive growth disaster, and coastal zone ecological environment recovery technology.

329. Development of energy saving and environmental protection technologies and related services.

330. Development and application of technologies for recycling and comprehensive utilization of resources and for recycling of emissions and discharges from enterprise productions.

331. Environmental pollution treatment and monitoring technologies.

332. New technologies for energy efficiency in chemical fiber production and printing and dying processing and for the treatment of exhaust gas, waste liquid and waste residue.

333. Desertification prevention and desert treatment technologies.

334. Comprehensive management technology for grassland-livestock balance.

335. Civil satellite application technology.

336. Research and development centers.

337. High and new technology, new product development, and enterprise incubation centers.

338. Development and application of internet of things technology.

339. Industrial design, architectural design, costume design and other creative industries.


IX. Water Conservancy, Environmental, and Public Facility Management Industries

340. Construction and operation of urban enclosed roads.

341. Construction and operation of urban subway, light railway and other track transport.

342. Construction and operation of sewage and garbage treatment plants, hazardous waste treatment and disposal plants (incineration plants and landfills), and environmental pollution treatment and control facilities.

343. Construction and operation of urban parking installations.


X. Education

344. Non-academic vocational training institutions.


XI. Health and Social Services

345. Service institutions for seniors, the disabled and children.

346. Nursing institutions for the aged.


XII. Cultural, Sports and Entertainment Industries

347. Operation of performance sites.

348. Operation of sports grounds and body-building, contest performance and sports training and intermediate services.

edit:王成福
Scan to open the current page